Publicidad
Idiomas disponibles
Idiomas disponibles
Timer Setting
This feature allows you to program a Standing Time after cooking is completed, to program the oven as a
minute timer and/or to program a delay start.
To Use as a Kitchen Timer:
To Set Delay Start:
Example: To count 5 minutes
1
.
(
Timer
• Press.
2'000
* Set desired amount of time
(up to 99 minutes and 99
seconds).
3
.
• Press.
►Time will count down
without oven operating.
s
\
Start
To Set Stand Time:
Example: To stand for 5 minutes after cooking
(3 mins, at MEDIUM Power)
1
.
Power
Level
\_
4 times
• Set the desired cooking
program (see page 8 for
directions).
00E
2
.
Timer
• Press.
EBB
• Set desired amount of
Stand Time (up to 99
minutes and 99 seconds).
4
.
(—
—
1
Start
L_
_J
• Press.
►Cooking will start. After
cooking, stand time will
count down without oven
operating.
Example: To start cooking 5 minutes later
(3 mins, at MEDIUM Power)
1.
' 1
Timer
j
• Press.
000
• Set desired amount of
delayed time (up to 99
minutes and 99 seconds).
3
.
0
Power
Level
\
0 0
• Set the desired cooking
program (see page 8 for
directions).
4
.
-.
Start
• Press.
►Delayed time will count
down.
Then cooking will start.
NOTES:
1. If oven door is opened during Stand Time or Kitchen
Timer, the time on the screen will continue to count
down.
2. Delay Start cannot be programmed before any
Auto Control Function.
This is to prevent the starting temperature of the
food from rising before defrosting or cooking
begins. A change in the starting temperature
could cause inaccurate results.
-11
-
Publicidad
