Audi 8V3.071.126 Instrucciones De Montaje página 27

General safety notes
WARNING
Please read these assembly instructions carefully before
starting installation. Non-compliance with these assembly
instructions and safety notes will compromise your safety
and that of third parties.
WARNING
All bolt connections and connections for the roof bars and
for the add-on components must be checked prior to trav-
elling to make sure they are positioned and installed cor-
rectly. Tighten if necessary.
Recheck bolted connections and connections at appropri-
ate intervals and tighten if necessary. The bolted connec-
tions and connections must be checked at short intervals if
travelling on a poor stretch of road.
If this guideline is not observed, this can result in the roof
bars or the add-on components becoming loose or falling
off — risk of accident!
WARNING
For the safety of other road-users, the roof bars and any
add-on components must be removed from the vehicle
when they are not being used.
WARNING
Repairs or the replacement of parts must only be per-
formed by a qualified workshop. It is recommended that
genuine spare parts available from your Audi partner are
used.
Caution
The height of the vehicle will change as a result of instal-
ling the roof bars with/without add-on components. Please
remember this when entering garages, driving through tun-
nels, underpasses etc.
Caution
Do not enter a car wash with roof bars with/without add-on
components installed.
Installation instructions - Audi A3 (8V3) 2012 ▶
Edition 06.2012
2 Safety notes 5