Installing/Removing Roof Bars On Vehicle; Installing Roof Bars On Vehicle - Audi 8V3.071.126 Instrucciones De Montaje

Ocultar thumbs Ver también para 8V3.071.126:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 101
Installation instructions - Audi A3 (8V3) 2012 ▶
Edition 06.2012
4
Installing/removing roof bars on
vehicle
4.1

Installing roof bars on vehicle

Note
The roof bars must be installed by two people.
– Open the vehicle doors.
The mounting holes -X- for the front roof bar are located on the
undersides of the decorative roof trims.
The position markers (arrows) -Y- for the rear roof bar are loca-
ted on the side window.
● Clean the contact area between the vehicle roof and the roof
bars thoroughly (they should be free from dust and grease).
– Open the lock -17- using the key -18-.
– Note the key number of your roof bars. This will facilitate re-
placement in the event of loss.
_________________________________________________
– Open the cover flaps -16-.
– Connect the torque wrench -15- to the bolts -13- and un-
screw until obvious resistance is felt.
8

4 Installing/removing roof bars on vehicle

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

8v3.071.126.l

Tabla de contenido