Publicidad
Idiomas disponibles
Idiomas disponibles
FAULT
Water stains on plastic
parts
Difficult to remove
white coatings on
dishes, inside the
appliance or on the door
Plastic items inside the
appliance are
discoloured
Tea or lipstick remains
on the dishes
Coloured (blue, yellow,
brown) coatings in the
interior of the appliance
or on stainless steel
crockery that are
difficult or impossible to
remove
Plastic items are
discoloured
Removable streaks on
glasses and cutlery
Difficult to remove
white coating on
stainless steel, glass
Glasses become dull
8
POSSIBLE CAUSE
Dishwasher detergent has
clumped together due to
long storage time
Drop formation cannot be
avoided
Deposits of dishwasher
detergent ingredients
Water hardness range is
incorrectly set
Dishwasher detergent with
multiple functions or
biological/ecological
detergent used
Normal phenomenon
Programme wash
temperature is too low
Detergent has too little
bleaching effect
Coating is formed by metallic
components on silver or
aluminium tableware
Wash temperature is too low
Signs of excess rinsing agent
Lack of rinsing agent
Signs of an excess
regenerating salt
Glasses are not dishwasher
safe
REMEDY
Use new dishwasher detergent
• Topping up rinsing agent
• Increase water softening
system setting
• Change dishwasher
detergent
• Clean appliance
mechanically
• Adjust water softening
system to higher water
hardness
• Refill with regenerating salt
• Change dishwasher
detergent
• Use separate agents
(dishwasher detergent,
regenerating salt, rinsing
agent)
No impairment of the
operation of the appliance
Select programme with higher
wash temperature
Change dishwasher detergent
Clean the appliance
mechanically or use a machine
cleaner.
Coatings are harmless to
health.
Select programme with higher
wash temperature
Set rinsing agent quantity to a
lower level
Fill with rinsing agent
Check water hardness setting
(see chapter 4.1 "Setting the
water hardness")
No remedy possible. Buy
dishwasher safe glasses.
Faults
Seite | 51
Publicidad
