flir K Serie Guia Para Empezar página 14

3 EN-US English
2. On/off button. This button has three functions:
• Push the on/off button to turn on the camera.
• Push and hold the on/off button for more than 3 seconds but less than 10
seconds to put the camera into standby mode. The camera then auto-
matically turns off after 6 hours.
• Push and hold the on/off button for more than 10 seconds to turn off the
camera.
3. Battery.
3.9 Screen elements
See Figure 2.3 Screen elements, page 3.
1. Low-sensitivity range indicator.
2. Overheating indicator. The indicator provides a visual warning to the user
that the thermal imager is about to shut down due to internal overheating.
3. Temperature scale.
4. Digital readout of the temperature at the position of the spotmeter.
5. Battery status indicator.
6. Camera mode indicator (e.g. fire mode).
7. Spotmeter.
3.10 Cleaning, decontamination and disinfection
3.10.1 Cleaning
3.10.1.1 Camera housing, cables, and other items
3.10.1.1.1 Liquids
Use one of these liquids:
• Warm water
• A weak detergent solution
3.10.1.1.2 Equipment
A soft cloth
#T810137; r. AB/53148/53148; mul 6