Publicidad
Idiomas disponibles
Idiomas disponibles
base, power cord is connected to power socket and charging base, and there is at
least 50% water in clean water tank. After self cleaning, please clean dirty water
tank again.
2.When the power is lower than 10%, the machine cannot enter the self cleaning
mode or hot drying mode. After charging for a period of time, it can work on self
cleaning mode or hot drying mode.
Clean water tank empty indicator
1.During use of the stick vacuum and washer, if LED screen shows "
the voice reminds "No clean water, please fill water", please fill clean water into clean water tank and then
continue to use directly.
2.During self cleaning, if there is no water inside clean water tank, the self washing automatically stop and the
voice reminds "No clean water, please fill water". Please fill clean water into clean water tank and then press
self cleaning button again to restart self cleaning.
Fill up clean water tank
Fill up clean water tank: After removing the clean water tank, open the water filling plug, flip it upward to
expose the water inlet hole, pour clean water and cleaning solution in, and then plug back to the original
position and reinstall the clean water tank to floorhead. (Fig 15)
Note: When adding clean water, you can add the JIMMY cleaning solution equipped with the product, the ratio
is about two bottle of cleaning solution to one full water tank, the water temperature cannot exceed 40°C.
Dirty water tank full indicator
1.When the stick vacuum and washer detects that the dirty water tank is full, the machine will stop working
and give a voice reminder. Please clean the full dirty water tank and put it back before use.
2.When it is detected that the dirty water tank is full in self cleaning mode, the machine will stop working and
give a voice reminder. Please clean the full dirty water tank and put it back and repress self clean button to
restart self cleaning.
Dirty water tank cleaning
Take out dirty water tank upper cover and filter frame, dump the dirty water, assemble the dirty water tank
after washing, and put it back to the mainbody. (refer to Cleaning and Maintenance of dirty water tank" for
details)
Brushroll stuck indicator
When the cleaner is in vacuuming or self cleaning mode, if the brushroll is stuck, the machine will stop and
give a voice reminder. Please take out brushroll, clean the foreign matter attached to the brushroll or the hair
winding on brushroll and reassemble the brushroll into floorhead to resume working.
Brushroll cleaning
After removing the clean water tank, pull out brushroll, use the blade on the mini brush to cut the hairs winding
on brushroll, and clean the foreign matter attached to the brushroll and floorhead, Install brushroll and window
back. (refer to "Cleaning and Maintenance of Floorhead Assembly" for details)
Air path blocked indicator
1.When the stick cleaner is in working or self clean mode, if the air path is blocked, the machine will stop
working and give a voice reminder. Please clean possible blocked areas like handheld vacuum dust cup,
nozzle air path, dirty water tank in sequence. After cleaning, restart the machine to work.
2.When handheld vacuum cleaner is working, if the air path is blocked, cleaner will automatically stop. At this
time, the dust cup and HEPA need to be cleaned.
Water
filing plug
15
" and
9
Publicidad
