Jimmy PW11 Pro Manual De Instrucciones página 12

Air path cleaning
Disassemble the dirty water tank, take out dirty water tank
upper cover and garbage basket, wash all parts and them
asssemble back. Use cleaning brush to clean the dirt,
foreign objects and hair inside air path of floorhead. Put
dirt water tank back into mainbody.
Remove the dust cup,then take out cyclone , empty the
dust cup, remove HEPA, clean all parts and reassemble
the dust cup. (Refer to "Cleaning and Maintenance" for
details)
Voice reminding function
The product includes voice reminding of 5 different
language: English, German, Italian, French and Russian.
Voice of the new machine is turned on and in English
by default, press the voice button to switch to other
language, keep pressing the voice button to turn off the
voice function; press the voice button again to turn on the
voice function. (Fig 16)
Note: When the product is used as handheld vacuum
cleaner or stick vacuum cleaner, there is no voice
function.
Battery low power indicator
1.When the stick cleaner is working, if the voice reminds
"Low battery. Please charge the battery", Please use it
after charging.
2.When the stick cleaner is working, if the voice reminds "Low battery. Machine will be turned off soon. Please
charge the battery", the power is about to be exhausted, and it will automatically shut down. Need to charge
for use.
3. When using vacuum cleaner, the icon on LED sceen displays left working minutes. When battery power is
lower than 20%, the battery icon on right top corner turns from white to red.
Chapter 3 Cleaning and Maintenance
Dirty water tank cleaning
After turning off the vacuum cleaner, remove the dirty water tank, lift the water tank top cover, and remove
the filter frame from it, open the flip cover of the filter frame, take out the filter. Pour out dirty water and dirt in
the water tank, then wash dirty water tank, water tank cover, filter frame and filter. If there is foreign matter
in the dirty water tank pipe, it can be cleaned with cleaning brush; dry the above parts after washing. And
then reassemble all the parts back into dirty water tank. Put dirty water tank back into mainbody to continue
working. (Fig 17)
Note:
1. After using stick vacuum cleaner, it is recommended to clean the dirty tank immediately;
2. When reinstalling the garbage basket,do not fold the black soft rubber under the filter.
Floorhead cleaning
After removing the clean water tank, brushroll, and dirty water tank, insert the cleaning brush through the circular
hole below the installation position of the mainbody to clear foreign matter and scales in the pipe, and the clogged
hair; Use the blade on the mini brush to cut off the entangled hair on the brushroll; Wipe the dirty parts of the
10
16
Dirty water tank
cleaning
17
18
Voice
button