Zummo Z40 NATURE ADAPT Manual De Usuario página 35

If the exterior basket is incorrectly positioned, the machine will not work and the
5
display panel will show Error. The basket will appear shaded intermittently.
If for any reason the machine gets blocked during operation, after a few seconds the
6
motor will stop automatically and the display will show an Error message with a faulty
flashing icon, until the cause of the blockage is removed.
Thanks to a thermal protection system in the motor, in the event of overheating the
7
machine will stop and the display will show an Error message and a Thermometer
Icon / Error message with a faulty flashing icon. In this case, please wait
approximately 10 minutes to allow the motor temperature to decrease.
The error message will disappear. Please check that the ventilation gratings and the
fan are not obstructed.
If there is no message on the display, it means there is no power supply. Check that
8
the power switch is on and that the plug fuse is not burnt out (Fig. 28).
35
Z40C-N Z40A-N / Z40B-N