Publicidad
Idiomas disponibles
Idiomas disponibles
20
3. Operation Spot Lights
3.1 Assembly
3.2 Power connection
The EasyLED Spot Light Plus can be mounted on all common microscope
or swing-arm stands. Adapters are included with the light source or are
available from the dealers or manufacturer.
Insert the mounting adapter (A) into the receptacle on the underside of the
light source as far as it will go and tighten the two mounting screws (B) using
an Allen key (3 mm). You can now attach the Spot Light to the microscope
stand or swivel arm stand by clamping it using the mounting adapter. Keep
in mind, you may have to remove the microscope body or the carrier before-
hand and mount it again afterwards.
A
Insert the hollow plug of the enclosed power supply unit into the socket
provided for this purpose on the control unit. Make sure that your Spot
Light is only operated in the specified voltage range and with the enclosed
power supply unit.
B
Publicidad
