Transmitted Light Stage; Assembly; Power Connection; Start-Up Procedure - SCHOTT EasyLED Manual Del Usuario

22
4. Transmitted
Light Stage

4.1 Assembly

4.2 Power connection

4.3 Start-up procedure

Place or attach the Transmitted Light Stage in the recess provided on the micro-
scope stand so that the green indicator light faces the user. The basic version
of the Transmitted Light Stage has a diameter of 84 mm. Adapters are available
for other commonly used diameters to accommodate different microscope
brands.
Insert the hollow plug of the enclosed power supply unit into the socket
provided for this purpose on the control unit. Make sure that your Transmit-
ted Light Stage is only operated in the specified voltage range and with the
enclosed power supply unit.
You can switch the Transmitted Light Stage on and off by pressing the main
switch. If the unit is switched on, the green control lamp lights up. To discon-
nect the power supply, pull out the power plug.