3.
Product Description
3.1
Intended use
The TPA 200 can be used to read and display
measurement data from tire pressure sensors
from all the usual manufacturers. Furthermore,
the tire pressure sensors of the vehicle can be
reconfigured and activated. When swapping
the tire pressure sensor, the measured data of
the uninstalled tire pressure sensors can be
copied and programmed on the new universal
tire pressure sensors. TPA 200 can activate tire
pressure sensors with 315 MHz (US vehicles)
and 433 MHz (EU vehicles), if these vehicles are
available in the database. The "TPA Startcenter"
software can save the measurement data from
the TPA 200 in a database, and this enables a
vehicle-specific test protocol to be created.
!
The TPA 200 is only to be used, when the
vehicle is stationary. The TPA 200 must not
come into contact with water or other liquids.
i
You can find the current car cover and the
TPA 200 supported tire pressure sensors
on the website
http://bit.ly/bosch-tpa-startcenter
3.2
Prerequisites
The "TPA Startcenter" software must be in-
stalled on a PC/laptop with a Windows 7,
Windows 8 or Windows 10 operating system.
The PC/laptop must have at least one free USB
port (USB 2.0 or USB 3.0). The USB port is
used for charging the internal storage battery
of the TPA 200, and it can also be used for
transferring the measured values and updating
the TPA 200.
Robert Bosch GmbH
Product Description | TPA 200 | 21
3.3
Training
The TPA 200 must be operated by specialist
personnel instructed in its use. We recommend
user training
*)
maintenance of tire pressure sensors.
*) User training through AA Training Center
3.4
Scope of delivery
Designation
TPA 200
USB connecting cable
CD with TPA Startcenter software 1 687 005 103
Original operating instructions
3.5
Product description
3.5.1
TPA 200
Fig. 1:
TPA 200
1 LCD display
2 USB port (mini USB)
3 Selection keys
4 Function key
in the testing, programming and
Order number
–
1 684 465 683
1 689 989 200
1
2
3
4
|
1 689 989 200
en
2019-12-24