Descargar Imprimir esta página

Tractel Dynascale Manual De Instalación, De Utilización Y De Mantenimiento página 7

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 43
Table of contents
1. Priority instructions ....................................... 7
2. Definitions and pictograms ........................... 8
2.1. Definitions ............................................. 8
2.2. Pictograms ........................................... 8
3. Description and marking ............................... 8
3.1. Presentation ......................................... 8
3.2. Operating principle ............................... 9
3.3. Markings ............................................... 9
4. Associated equipment .................................. 9
5. Uses ............................................................. 9
5.1. Installing the batteries .......................... 9
5.2. Installation .......................................... 10
5.3. Starting up .......................................... 10
5.4. Functions ............................................ 10
5.4.1. Automatic zeroing ........................ 10
5.4.2. Tare function ................................ 10
5.4.3. Peak load function ....................... 10
5.4.4. Change of units ........................... 11
5.4.5. Turning the product off ................ 11
5.4.6. Overload ...................................... 11
5.4.7. Infrared remote control ................ 11
5.5. Deinstallation ...................................... 11
6. Prohibited uses ........................................... 11
7. Maintenance and periodic verification ........ 12
7.1. Battery replacement ........................... 12
7.2. Other verifications .............................. 12
8. Transport and storage ................................ 12
9. Product disposal and environmental
protection ................................................... 12
10. Technical specifications ............................ 13
11. Regulations and standards ....................... 14
12. Troubleshooting ........................................ 15
13. Declaration of conformity .......................... 15
1. Priority instructions
1. Before installing and using this product, it
is essential that you read this manual and
comply with its instructions for safe and
effective use. A copy of this manual must be
made available to all operators. Additional
copies can be obtained upon request from
Tractel.
2. Do not use this product if any of the labels
affixed to it or any of its accessories, or any
of the markings on it as shown at the end of
this manual are no longer present or legible.
Identical labels can be obtained upon request
from Tractel and must be affixed before
continuing to use this product.
3. Make sure that any user of this product is
familiar with its operation and capable of
applying the safety requirements for the
task to be performed. This manual must be
provided to all users. Protect your equipment
from uncontrolled intervention.
4. This product must be installed and put into
operation in conditions that ensure the safety
of the installer in accordance with applicable
local regulations.
5. Every time you use the product, first inspect
its condition and that of any accessories.
Never use a product that does not appear to
be in good condition.
6. Return the product to the manufacturer for
servicing if there are any visible or operating
problems unrelated to the battery condition.
7. Protect the product from impacts.
8. This product may never be used for
operations other than those described in
this manual. It may never be used for loads
above the safe working load indicated on the
product. It may never be used in an explosive
atmosphere.
9. Before this product is used in a man-riding
system, the supervisor must first verify the
application of the coefficients of use required
for the safety of personnel, and generally
compliance with the safety regulations
applicable to the load line in which it is used.
10. Tractel shall not be liable for the operation of
this product in an assembly configuration not
described in this manual.
EN
7

Publicidad

loading