Publicidad
Idiomas disponibles
Idiomas disponibles
11. Any modification of this product without the
approval of Tractel or any removal of any
component part shall release Tractel from
EN
any liability.
12. Any
disassembly
described in this manual or any repair work
not approved by Tractel shall release Tractel
from any liability, especially if original parts
are replaced by parts from another source.
13. A Dynascale weighing hook is a lifting
accessory
applicable to that category of equipment
must be applied.
14. When the product is finally withdrawn from
service, it must be scrapped in such a way
that it cannot be used again. Comply with
environmental protection regulations.
15. This product is approved according to
European regulations and the standards
specified in the section "11. Regulations
and standards", and must be verified for
compliance with the regulations of any other
country in which it may be used, prior to
commissioning and use. Comply with such
regulations.
16. Any use of this product with additional
equipment that relays its signals to an
operating system must be preceded by a risk
analysis specific to the operating functions
used and all appropriate measures must be
taken accordingly.
17. The product is not approved for commercial
transactions.
18. As part of continual product improvement,
Tractel reserves the right to make changes
to the product.
2. Definitions and pictograms
2.1. Definitions
In this manual, the following terms have the
meaning given below:
"Product": Item or equipment described in this
manual and delivered complete in the standard
version, or in its various existing models.
"Installation": All the operations required
to bring the complete product from the state
8
of
this
product
and
the
safety
regulations
in which it was delivered into a state of
commissioning (or connection to other elements
for commissioning).
"Supervisor": Individual or party responsible
not
for the management and safe use of the product
described in the manual.
"Technician": Qualified person familiar with the
product, in charge of the maintenance operations
described and permitted in the manual.
"Operator": Individual using the product in
accordance with the instructions in this manual.
"MR": Measurement Range (full scale).
"SWL": Safe Working Load.
2.2. Pictograms
DANGER: When placed at the beginning
of a paragraph, it indicates instructions for
preventing injuries ranging from minor to fatal
and also environmental damage.
IMPORTANT: When placed at the beginning
of a paragraph, it indicates instructions for
preventing product failure or damage which
would not directly endanger the life or health of
operators or other individuals and/or which may
harm the environment.
NB: When placed at the beginning
of a paragraph, it indicates the necessary
precautions to apply for efficient and ergonomic
installation, use and maintenance.
: When placed on the product itself or a
product component, it indicates the need to read
the operating and maintenance manual.
3. Description and marking
3.1. Presentation
Dynascale are precision force sensors (0.5%
MR) for measuring forces and indicating loads.
The capacity range is from 1 t to 12.5 t.
Publicidad
