Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Cleaning liquid leaked
from the cleaning
liquid unit.
The cleaning liquid unit
cannot be removed.
26
Action
Do not press the cleaning
liquid unit removal button
during any mode.
Place the self‑cleaning
recharger horizontally.
If you use the self‑cleaning
recharger when the shaver
is wet or when soap or
shaving gel is on the shaver,
cleaning liquid may leak.
Place the self‑cleaning
recharger on a hard, flat
surface.
(See page 15.)
Problem
The mode does not
start.
The shaver cannot be
charged.
Action
Check that the AC adaptor
is connected to the self‑
cleaning recharger, and that
the adaptor is plugged in to
a household outlet. (See
page 18.)
Confirm that the shaver is
properly attached to the
self‑cleaning recharger.
(See page 18.)
The Clean or Dry function
may not operate under
extreme low temperatures
(approximately 0 °C or lower).
Check if the STATUS lamp
is glowing. (See page 23.)
Gently wipe the main body
rear terminals and the
charging terminals of the
self‑cleaning recharger with
a cloth or tissue dampened
with water.
Publicidad
