Charging Kit; Charging Batteries - Soundworld Bluetooth Serie Manual De Uso

CHARGING KIT

Charger
power supply
(wall plug)

Charging Batteries

While your batteries may have a small charge when you
unpack them, we recommend fully charging the batteries
before you start using your CS50. It will take up to 2 ½ hours
to fully charge your batteries. Fully charged, each battery will
power the CS50 for up to 15 hours of normal listening.
6
Charger base has two
battery charging stations
with independent LED
indication lights.
Charger cable
micro-USB to USB
To charge the batteries:
1. Assemble the
charging kit by
plugging the small
end of the cable into
the charger base,
and plugging the
large end into the charger power supply.
Note: The large end of the charging cord can also be
plugged into a standard USB connector on your computer.
2. Plug the power supply into a standard AC outlet.
The lights on top of the charger will glow blue to
confirm power is reaching the charging stations.
3. Connect the batteries to the two charging points on
the charger by aligning the magnets. Once the battery
is in place, the indicator light will change color.
A red light indicates the battery is charging. The light
will turn green when the battery is fully charged and
is ready to use.
WARNING - Magnetic Field
Can be harmful to pacemaker and defibrillator wearers.
Do not place CS50 earpiece or batteries in a shirt pocket
or near your pacemaker or defibrillator.
7