Using Your Cs50; Pairing With Bluetooth Devices; Answering Phone Calls - Soundworld Bluetooth Serie Manual De Uso

USING YOUR CS50

Pairing with Bluetooth devices

Pairing your CS50 to a Bluetooth device like smartphones
and computers is a simple one-time operation. Your CS50
will seek and attempt to pair with Bluetooth devices for 3
minutes each time the battery is attached. After that time,
if no devices have been detected, the unit will stop trying
to pair and the Bluetooth transmission will be turned off.
1. Be certain the device you wish to pair with has its
Bluetooth functionality turned on. (See device
instructions for specific details.)
2. Attach a charged battery to the CS50.
3. Watch the device you are trying to pair with for CS50
to be detected. CS50 should appear on the screen.
If asked for a pin, enter "0000".
4. Select the CS50 from list of Bluetooth devices to
ensure pairing. The CS50 will beep once when the
Bluetooth connection has been made. Two beeps
indicate the Bluetooth connection has been lost.
Note: For best results the CS50 should be within 10
feet of the Bluetooth device.
14

Answering phone calls

1. To answer a telephone call, press the CS50 volume
button. On some phones, you may need to select the
CS50 when answering a call.
2. During phone calls, the volume button can be used
to control the volume of the call. Press to increase
volume, push and hold to decrease volume.
3. To hang up, press the CS50 program button or end
the call with the phone's controls.
4. Do not push the program button during a call.
The call could be terminated.
Note: For best results, place phone on same side of
body as CS50.
15