Bresser NATIONAL GEOGRAPHIC 9070300 Manual De Instrucciones página 31

18 Temperature alarm setting
1. In normal time display mode, press DOWN button for
approx. 2 seconds to enter temperature alarm time set-
ting mode.
2. Digits to be set are flashing.
3. Settings order: ON/OFF (Temperature alarm on/off) >
Temperature highest limit > Temperature lowest limit >
Exit
4. Press UP or DOWN button to change the value.
5. Press SET button to confirm and continue to the next
setting.
6. The temperature settings mode will be quit automatic-
ally after 30 seconds of inactivity. All settings done be-
fore will be saved.
7. When outdoor temperature reaches highest or lowest
limit, the temperature alarm symbol will flash and an
alarm will sound for approx. 3 seonds. This will be re-
peated with an interval of 1 minute until the temperat-
ure has fallen below the limit again.
NOTICE! NOTICE! Select temperature alarm OFF from
the temperature settings mode to disabled the temper-
ature alarm permanently.
19 Disposal
Dispose of the packaging materials according to its type. In-
formation on proper disposal can be obtained from the muni-
cipal waste disposal service provider or environmental agency.
Do not dispose of electronic devices in the household
garbage!
According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its transposition into
national law, used electrical equipment must be collected sep-
arately and recycled in an environmentally sound manner.
31 / 100