Publicidad
Idiomas disponibles
Idiomas disponibles
Rear
AC 24V 1 and
2 terminals ®
[4] LENS connector @
VIDEO OUT connector (BNC)
Connect to a video input connector of a video monitor or switcher.
LENS connector
When using an auto-iris or zoom lens, replace the plug on the lens cable with the
plug supplied with the camera, and plug it into this connector. When you use an
auto-iris lens, change the CCD IRIS switch setting to OFF.
Note on the CCD IRIS switch
CCD IRIS switch is an internal switch which switches the CCD IRIS function on and
off. This switch is factory-set to ON. When you use an auto-iris lens, you have to
change the switch setting to OFF. To change the switch setting, contact your Sony
representative.
[5] GND (ground) terminal
Connect this terminal to the ground.
Publicidad
