Like It PRO600 Instrucciones De Montaje Y Funcionamiento página 44

EN
5. Programming the operator
5.1 Preparing
5.1.1- Keep trolley locked, pull or push the door by hand, make sure the trolley connects
with the chain connection device. (until you hear it block).
5.1.2- Turn on the power, the courtesy light is on for several seconds.
Meanwhile, LED display will show numbers from " 9 " to " 1 ". Then the operator turns to
standby situation.
5.1.3- At last, it displays " I I " or " - ".
5.2 Setting open and close positions
5.2.1- Press and hold button SET until display shows " 1 ".
5.2.2- Press button UP to open the door (and if necessary UP or DOWN), until the door
reaches the desired opening position.
5.2.3- Adjust and tighten the rear mechanical stop (A), about 10 mm from carriage (B) shown in figure 2.
B
43
SET
CODE
A
Fig 1.
UP
DOWN
B
Lock
A
Fig 2.
LIKE IT