Like It PRO600 Instrucciones De Montaje Y Funcionamiento página 51

This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product type: garage door opener.
Models:
MR (MR500/PRO600; PRO800; PRO1200).
Serial number (example):
Manufacturer:
Address:
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
- Machines 2006/42/EC;
- Electromagnetic compatibility 2014/30/EU;
- Radio equipment and telecommunications 2014/53/EU;
- RoHS 2011/65/EU and its amendment 2015/863;
- REACH nº 1907/2006;
-2006/66/EC and its amendment 2013/56/EU on batteries and accumulators and waste batteries and
accumulators;
-94/62/EC and its amendment 2005/20/EC - on packaging and packaging waste;
And meets the following standards:
EN 60335-2-95:2015/A2:2019
EN 60335-2-103:2015
EN 60335-1:2012/A2:2019
EN 62233:2008
prEN12635:2015
EN 13241:2003/A2:2016
EN 12100:2010
The designated product was subject to sample testing issued by:
- TÜV SÜD Certification and Testing Co. (nr: TL 140) issued the EU-type examination certificate, in the test
reports number: 64110130385105 (MD), 64960150437502 (RED), 64.165.19.03829.01B
( R E A C H ) , 6 4 . 1 6 5 . 1 9 . 0 3 8 2 9 . 0 1 A ( R o H S ) , 6 4 . 1 6 5 . 1 9 . 0 3 8 2 9 . 0 1 C , 6 4 . 1 6 5 . 1 9 . 0 3 8 2 9 . 0 1 D ,
64.960.15.04375.02R (RF), 64.960.15.04375.02E (EMC), 64.664.16.041.03 (MD & CPR), 70.401.18.164.06
This partly completed machinery applied the essential requirements of the Directive 2006/42/EC and the
relevant technical documentation is compiled in accordance with part B of Annex VII.
This partly completed machinery must not be put into service until the final machinery into which it is
incorporated has been declared in conformity with the provisions of the Directive 2006/42/EC, where
appropriate. There is a commitment to provide, in response to a reasoned request from the competent national
authorities, relevant information on the partly completed machinery.
Name of the responsible for the technical compilation in the Community: Denny Narciso.
Address: Rua da Majoeira nº400, 2415-184 Ponte da Pedra, Leiria, Portugal
Place and date of the Declaration: Leiria, 07.05.2021
Identity and signature of the Responsible for writing the Declaration on behalf of the manufacturer:
Signed for and on behalf of: FLEXIDOOR S.A.
LIKE IT
Quinta São João das Areias, Rua A, Lote 62, 2685-012 Sacavém – Portugal
EU/CE DECLARATION OF CONFORMITY
MODEL:PRO 600
2021 08 02 836
A B C D
Flexidoor – Portões seccionados e automatismos, S.A.
Quinta São João das Areias, Rua A, Lote 62, 2685-012 Sacavém
EN 301 489-3 V2.1.1 (2019-03)
EN 301 489-1 V2.2.3 (2019-11)
EN 61000-6-1:2007/A1:2011
EN 61000-6-2:2005
EN IEC 61000-3-2:2019
EN IEC 61000-3-3:2013+A1:2019
EN 12453:2017
Declaration of incorporation of partly completed machinery
Production Manager
Flexidoor – Portões seccionados e automatismos, S.A.
Tel.: +351 244 850 470 E-mail: info@flexidoor.pt
A = Year;
B = Month;
C = Day;
D = Serial number;
Sérgio Ferreira,
EN 300 220-1 V3.1.1 (2017-02)
EN 300 220-2 V3.1.1 (2017-02)
EN 62479:2010
EN 50663:2017
EN 55014-1:2017
EN 55014-2:2015
EN 13849-1:2015
EN
50