ASSEMBLY
Connecting nozzle to the Easy Fit Adapter
Align the slot (8) with the nib on adapter (7), push it in and rotate
gently around 45 degrees to tighten it until the nib reach smaller
ending of wider slot.
ATTENTION! Do not force to fit inside small slot!
8
7
50
8
7
OPERATION MANUAL
Use Tap water.
Use only cable drums
Keep the pistol lever
( Page 54 )
designed for 3500 W
pressed continuously
and cable must be fully
during the heating-up
unwound.
phase and while you
( Page 55 )
are working.
( Page 56 )
EN
Descale the device at
The device must be
regular intervals.
stored frost-free!
( Page 67 )
( Page 67 )
51