Cherubini BLUE WAVE RX Serie Manual De Instrucciones página 32

This function allows to drive the awning to a favourite middle position.
when this middle position is memorised, just press the stop button for 2
seconds and automatically the motor will move the awning to this position.
ATTEnTIOn! Deleting the opening position will also delete the middle position!
To memorise the middle position, move the awning to the desired position and then hold
the STOp button down (for about 4 sec.) until the motor gives confirmation.
Tn: Already programmed remote control
up
down
If you want to delete the middle position, it can be done as described below.To change this
position, it's also necessary to delete first the memorised middle position.
Before deleting the middle position, the awning must go to the middle position by
pressing STOp for 2 second, then press STOp again (for abt. 4 seconds) until the motor
performs the confirmation movement
B
up
Tn (2 sec)
SeTTing a middle poSiTion
B
Tn (4 sec)
deleTing The middle poSiTion
B
down
Tn (4 sec)
32