Cherubini BLUE WAVE RX Serie Manual De Instrucciones página 36

Special funcTionS
addiTional middle poSiTion
deScripTion
The additional middle position is useful to open the awning automatically through the
windtec Lux sensor and to bring it to a middle position when the light of the environment
exceeds the threshold set.
This additional middle position can be used only in combination with the light automatism
of the windtec Lux sensor.
The awning cannot be brought to this position with the remote control.
However, there is the possibility to program the current middle position using the B(2sec)
command.
If the additional middle position is not programmed, the light automatism of the windtec
Lux sensor (when enabled) opens the awning completely. when the windtec Lux (Set
button) sensor is tested, the movements of the motor do not take the additional middle
position into consideration: the awning always stops in the half-way position and opens
completely if the light exceeds the threshold value.
SeTTing The addiTional middle poSiTion
After saving the limit switches, carry out the following command sequence:
Tn: already stored remote control
B B
B C
+
2sec
Tn
Starting from this moment, the motor moves in the "dead man" mode. This makes it
possible to regulate the additional middle position in a precise way.
36