Socket Mobile DuraScan 800 Serie Manual De Usuario página 10

In this mode the scanner functions and communicates similar to a keyboard.
Therefore, the scanner will work with Notes, and any other application that
supports an active cursor.
1. Power on the scanner. Make sure the scanner is discoverable (unpaired and
Bluetooth LED blinking).
2. Go to Settings > Bluetooth.
3. Make sure the Bluetooth is "On" and scan for devices.
4. In the list of found devices, tap S8xx [xxxxxx] to Pair.
5. The scanner will connect to the host device.
6. The scanner will beep once after it has connected.
*If you have trouble connecting or pairing with host device, turn host device's
Bluetooh off/on, and/or perform factory reset on the scanner (see page 16).
Now you are ready to scan barcodes!
Basic Mode
Connect Device in Basic Mode
10