Socket Mobile DuraScan 800 Serie Manual De Usuario página 15

Factory Reset will restore the scanner to factory default settings.
Scan this barcode to reset your scanner:
If your scanner cannot scan the factory reset barcode, then follow the button
sequence:
1. Power ON the scanner.
2. Press and hold the scan button
button , while continuing to hold the scan button.
2
3. Release the scan button after the scanner beeps once (after 15
seconds). You will hear 5 more beeps then the scanner will power OFF.
Note: If you follow this sequence, but release the scan button too early (before
15 seconds and the beep) the Factory Reset will have failed.
Watch How To video:
Factory Reset
Scan Button
, then quickly press and release the power
1
1
https://vimeo.com/504468657
15
Power Button
Quickly press
and release
the power
button
2