Publicidad
Idiomas disponibles
Idiomas disponibles
CAPSPRAY X 80
plug provided. If the plug will not fit the outlet, have the proper outlet
installed by a qualified electrician.
This product is for use on a nominal 120 volt circuit and has a grounding
plug that looks like the plug illustrated below. Make sure that the
product is connected to an outlet having the same configuration as
the plug. No adapter should be used with this product.
Grounded Outlet
Grounding Pin
Cover for grounded outlet box
1.3
IMPORTANT ELECTRICAL INFORMATION
Use only a 3-wire extension cord that has a 3-blade grounding plug
and a 3-slot receptacle that will accept the plug on the product.
Make sure your extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to carry the current
your product will draw.
An undersized cord will cause a drop in line voltage resulting in loss of
power and overheating. A 14 or 12 gauge cord is recommended (see
chart). If an extension cord is to be used outdoors, it must be marked
with the suffix W-A after the cord type designation. For example,
a designation of SJTW-A would indicate that the cord would be
appropriate for outdoor use.
Cord Gauge
12
14
1.4
SAFETY HAZARDS
WARNING: GENERAL
This product can cause severe injury or property
damage.
PREVENTION:
•
Read all instructions and safety precautions before operating any
equipment.
•
Follow all appropriate local, state, and national codes governing
ventilation, fire prevention, and operation.
•
The United States Government Safety Standards have been
adopted under the Occupational Safety and Health Act (OSHA).
These standards, particularly Part 1910 of the General Standards
and Part 1926 of the Construction Standard should be consulted.
•
Use only manufacturer authorized parts. User assumes all risks
and liabilities when using parts that do not meet the minimum
specifications and safety devices of the manufacturer.
•
Before each use, check all hoses for cuts, leaks, abrasion or
bulging of cover. Check for damage or movement of couplings.
Immediately replace the hose if any of these conditions exist.
Never repair a hose. Replace it with an identical replacement hose.
•
Do not spray outdoors on windy days.
•
Wear clothing to keep paint off skin and hair.
•
Never aim the spray gun at any part of the body.
Maximum Cord Length
150 feet
100 feet
WARNING: EXPLOSION HAZARD
DUE TO INCOMPATIBLE MATERIALS
Will cause property damage or severe injury.
PREVENTION:
•
Do not use materials containing bleach or chlorine.
•
Do not use halogenated hydrocarbon solvents such as bleach,
mildewcide, methylene chloride and 1,1,1 - trichloroethane. They
are not compatible with aluminum.
•
Contact your coating supplier about the compatibility of material
with aluminum.
WARNING: EXPLOSION OR FIRE
Flammable vapors, such as solvent and paint vapors, in
work area can ignite or explode.
PREVENTION:
•
Exhaust and fresh air introduction must be provided to keep the air
within the spray area free from accumulation of flammable vapors.
•
Turbine contains sparking parts. Turbine must be placed in a well
ventilated area at maximum distance from the spray area.
•
Avoid all ignition sources such as static electricity, open flames,
pilot lights, hot objects, cigarettes, and sparks from connecting and
disconnecting power cords and working light switches.
•
Use extreme caution when using materials with a flashpoint below
100° F (38°C). A fluid's flashpoint is the temperature at which vapors
from the fluid could ignite if exposed to a flame or spark.
•
Fire extinguishing equipment must be present and in working
order.
•
The power cord must be connected to a grounded circuit.
•
Follow the material and solvent manufacturer's safety precautions
and warnings.
WARNING: HAZARDOUS VAPORS
Paints, solvents, and other materials can be harmful
if inhaled or come in contact with body. Vapors can
cause severe nausea, fainting, or poisoning.
PREVENTION:
•
Wear respiratory protection when spraying. Read all instructions
supplied with the mask to be sure it will provide the necessary
protection.
•
All local regulations regarding protection against hazardous vapors
must be observed.
•
Wear protective eyewear.
•
Protective clothing, gloves and possibly skin protection cream are
necessary for the protection of the skin. Observe the regulations
of the manufacturer concerning coating materials, solvents and
cleaning agents in preparation, processing and cleaning units.
SAFETY PRECAUTIONS
3
Publicidad
