Titan CAPSPRAY X 80 Instrucciones De Uso página 5

CAPSPRAY X 80
3
CHOOSING A PROJECTOR SET
Your HVLP spray gun should be fitted with the
i
proper projector set for the type of work you will
be performing. A projector set consists of a needle
assembly (Fig. 2, item 1), a fluid nozzle (2), and an
air cap (3).
2
You should choose a projector set based on two things: the type of
material to be sprayed and the finish desired.
The chart in Section 9 (page 11) should help you to make the right
choice.
3.1
CHANGING A PROJECTOR SET
1.
Remove the air cap ring (Fig. 3, item 1), air cap (2), and spring
plate (3).
2.
Remove the fluid nozzle.
1
3
3
2
1
3.
Remove the material flow adjustment knob (Fig. 5, item 1) and
spring (2).
2
1
4.
Remove the needle (Fig. 6, item 1).
If the needle does not slide out easily, loosen the
packing nut (2) to prevent the needle or packing
from being damaged.
Attention
1
5.
Install the new projector set in reverse order.
CHOOSING A PROJECTOR SET
5