Publicidad
Idiomas disponibles
Idiomas disponibles
Installation - Existing Construction (continued)
8
Inserting the fan housing
□ Insert the fan housing through the existing hole in the
ceiling. The fan housing should be level and perpendicular
to the joist or stud.
10
Reattaching the motor assembly
□ Plug the motor assembly back into the power unit.
Reattach the motor assembly using the four screws (1)
removed in step 4.
9
Mounting the fan housing to the
joist
□ Mount the fan housing to the joist using three long wood
screws (D) where indicated by arrows inside the fan
housing mounted in the ceiling.
11
Installing the grille
□ Join the connectors for the light from the fan housing (A)
to the grille (B). The grille (B) must be connected BEFORE
turning on power to the fan.
□ Pinch the mounting springs on the grille (B) and insert
them into the narrow rectangular slots inside the fan (A).
Push the grille (B) up toward the ceiling.
□ Turn on electricity at the breaker box after finishing
installation.
1
10
D
NOTE: Make sure the mounting spring is properly loaded
into the fan slots.
A
B
Publicidad
