Publicidad
Idiomas disponibles
Idiomas disponibles
Installation - New Construction
CAUTION: Make sure power is switched off at service panel
before starting installation.
NOTE: Ceiling mount only.
1
Removing the wiring box housing
□ Remove the wiring box cover from the fan housing with a
Phillips head screwdriver (not included).
□ Remove the wiring knockout from the wiring box cover
with a flathead screwdriver (not included).
3
Mounting the fan housing
□ Mount the fan housing to the joist using four long wood
screws (D) where indicated.
2
Placing the fan housing
□ Place the fan housing next to a ceiling joist or wall stud.
The fan housing should be level and perpendicular to the
joist or stud (1).
6
1
D
Publicidad
