Aiwa CX-NA92 Manual De Instrucciones página 10

MANUAL TUNING
PRESETTING STATIONS
..
,-
"s
—.
WI
m""
/. —___ —
—
-.
—.;
du
)
—
INO
7 Press the TUNER/BAND button repeatedly to
select the desired band.
~FM-AM7
I J
When the TUNER/BAND button is pressed while the power
is off, the power is turned on directly.
2 Press the l++ DOWN or M UP button to select
a station.
Each time the button is pressed, the frequency changes.
When a station is received, "TUNE is displayed for 2 seconds.
During FM stereo reception, (IKDI1) is displayed.
To search for a station quickly (Auto Search)
Keep the K DOWN or ~ UP button pressed until the tune-r
starts searching for a station. After tuning in to a station, the
search stops.
To stop the Auto Search manually, press the K DOWN or M
UP button:
The Auto Search may not stop at stations with very weak
signals.
When
an
FM stereo broadcast contains noise
Press the MONO button on the remote control so that "MONO
appears on the display.
Noise is reduced, although reception is monaural.
MO,NO
.
To restore stereo reception, press the MONO button so that
The unit can store a total of 32 preset stations. (Each band has
a maximum of 20 available preset stations.) When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
7 Press the TUNER/BAND button to select a band,
and
press the l++ DOWN or M UP button to
select a station.
2 Press the 1I-SET button to store the station.
'
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
Frequency
Preset ~umber
3
Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands or a total of 20 preset stations for one band
have already been stored.
)
\