Seca 651 Instrucciones De Uso página 107

Permanently displaying the weight (Hold)
Device mode
Basic
Advanced
Expert
Service
When the Hold function is activated, weight continues to be displayed after the
weight has been removed from the scale. This enables you to attend to the pa-
tient before recording the weight.
✓
There is no load on the scale.
1. Ask the patient to step onto the scale.
2. Press the Hold key.
3. Wait until the weight has stopped flashing.
ð The message
Hold
4. To deactivate the function, press the
ð The
message is no longer displayed.
Hold
NOTE
– If the Autohold
cally displayed permanently as soon as stable measured values have
been achieved (è Activating Autohold
– If you wish to update measured values (weight and height), press the
Weight display field or press the
repeated and the updated measured values are displayed perma-
nently.
Function available
appears.
key.
Hold
function is activated, weight and height are automati-
function, page 114).
Hold key again. The measurement is
English
–
•
•
•
Operation • 107