Seca 651 Instrucciones De Uso página 110

Entering waist circumference
6.5 Completing the measurement
Stand-alone operation
110 • seca 651/650
If the symbol is visible on the main screen, you can enter the patient's waist
circumference. The waist circumference entry can be configured
BMI/BSA/Waist circumf., page 116.
1. Press the display field.
2. Enter the waist circumference.
3. Confirm the entry with the
ð Waist circumference is displayed on the main screen.
To complete a measurement on devices that are not connected to an EMR Sys-
tem or the seca analytics 125
1. Make sure that the displayed measured values are plausible.
2. Transfer the displayed measured values to the patient file manually.
3. Ask the patient to step off the weighing platform.
4. Press the key.
ð Measured values and manual entries are discarded.
ð The device is ready for the next measurement.
key.
software, proceed as follows:
è Selecting