Factory Reset will restore the scanner to Factory Default settings
(configured as shipped). If your scanner cannot scan the Factory Default
barcode below, then Follow the Factory Reset (button) sequence:
Or follow the steps below to manually reset the scanner:
1.
Turn ON the scanner.
2. Press and hold the trigger button
power button
3.
4. Let go of trigger button after the scanner beeps once (after 15 seconds).
Five confirmation tones will sound from high to low tones and then the
scanner will turn OFF.
Note: If you follow this sequence, but release the trigger button too early
(before 15 seconds and the beep) the Factory Reset will have failed.
Factory Reset
Scan the barcode below
Trigger Button
, while continuing to hold the trigger button.
2
1
Quickly press
and release
the power
button
Power Button
, then quickly press and release the
1
17
2