Socket Mobile SocketScan 800 Serie Manual De Usuario página 6

1. Insert charging cable into an AC charging adapter
(not included - most smartphones and tablets come with AC Adapters that
look something like this.)
2. Insert Micro USB into the 800 Series USB port.
3. The 800 Series will beep twice indicating adequate power is being supplied
to the unit.
Note: The SocketScan comes with a pre-installed rechargeable Lithium Ion
battery, the initial full charging of the battery can take up to 8 hours.
Power On
Press and hold down the small power button on the side until the SocketScan
beeps twice (low-high tone).
Charge the Battery
8 Hours
Side LED status
• Red = Charging
• Green = Fully charged
6