Publicidad
Idiomas disponibles
Idiomas disponibles
TABLE OF CONTENTS
Table of contents ............................................................... 1
Product specifications KN OSS-2 .....................................
Description of the symbols ................................................ 1
Introduction .......................................................................
Device description ............................................................. 2
Intended use ...................................................................... 5
Safety information ............................................................. 5
Unpacking .........................................................................
Attachment ........................................................................ 7
PRODUCT SPECIFICATIONS KN OSS-2
Voltage
120 V
frequency:
60 Hz
Power:
4A
No-load
2000 rpm
speed:
Oscilations:
58 opm
DESCRIPTION OF THE SYMBOLS
The use of symbols in this handbook is designed to direct your attention to possible risks. You must make sure that you understand
the safety symbols and explanations accompanying them. Warnings themselves cannot remove risks and cannot substitute correct
action for the prevention of accidents.
Caution
Read the operating
instructions to reduce
the risk of inquiry!
Before installation, cleaning, alterations,
maintenance, storage and transport switch off the
device and disconnect it from the power supply.
INTRODUCTION
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability for
damages to the product or damages caused by the product
that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare parts,
• Application other than specified,
We recommend:
Read through the complete text in the operating instructions
before installing and commissioning the device. The operating
instructions are intended to help the user to become familiar
with the machine and take advantage of its application
possibilities in accordance with the recommendations.
Oscilation
5/8"
stroke:
Table size:
15-3/4" x
16-1/32"
Spindle
4-17/32"
height:
N.W./G.W.
28.6 / 32.7 lb
ear-muffs!
Warning!
Operation .........................................................................
1
Cleanin .............................................................................
Transport ..........................................................................
1
Storage .............................................................................
Maintenance .....................................................................
Disposal and recycling ......................................................
Troubleshooting ................................................................
6
Parts list ........................................................................... 10
Schematic view ................................................................. 11
Subject to technical changes!
Total vibration values determined
in accordance with EN61029
Sound pressure level L
Uncertainty K
pA
Sound power level L
Uncertainty K
WA
Wear
Warning!
Danger to life, risk of injury
or damage to the tool
are possible by ignoring!.
The operating instructions contain important information on
how to operate the machine safely, professionally and
economically, how to avoid danger, costly repairs, reduce
downtimes and how to increase reliability and service life of
the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regulations that
apply for the operation of the machine in your country. Keep
the operating instructions package with the machine at all
times and store it in a plastic cover to protect it from dirt and
moisture. Read the instruction manual each time before
operating the machine and carefully follow its information.
The machine can only be operated by persons who were
instructed concerning the operation of the machine and who
are informed about the associated dangers. The minimum age
requirement must be complied with. In addition to the safety
requirements in these operating instructions and your
country's applicable regulations, you should observe
the generally recognized technical rules concerning
the operation of woodworking machines.
We cannot accept any liability for damage or accidents which
arise due to a failure to follow these instructions and
the safety instructions.
1
Wear hearing protection.
The effects of noise can
cause a loss of hearing.
76 dB(A)
Total vibration values
PA
(vector sum - three
3 dB
directions) determined
89 dB (A)
in accordance with
WA
EN 61029.
3 dB
Wear a
breathing
mask!
ATTENTION!
In this operating manual, we have used this sign
to mark all sections that concern your safety.
7
8
9
9
9
9
9
Wear
safety goggles!
Publicidad
