Descargar Imprimir esta página

Craftsman 919.152360 Manual Del Usuario página 13

Ocultar thumbs Ver también para 919.152360:

Publicidad

Idiomas disponibles

Idiomas disponibles

How to Inflate Tires
1.
Place the universal valve adapter
over tire valve stem.
2.
Press lever on universal valve
adapter down to lock in place.
I_
Risk of Flying
Objects/Bursting
Objects. Over inflating tire could
cause the tire to burst or the
universal valve adapter to pop off
the valve stem and become a
projectile. Use a tire pressure
gauge to ensure an accurate
tire
pressure reading, because the
pressure gauge on the unit is for
general reference only.
3.
See "How to Start" instructions
to start inflator.
How to Inflate
Sport
Balls
Risk of Bursting.
Most sports bails
with no initial air will fill in less than
10 seconds. Watch sport balls
carefully while filling, do not
overfill.
1.
Place inflator needle into the
universal valve adapter and press
lever on universal valve adapter
down to lock in place.
2.
Insert inflator needle into sport
ball to be inflated.
NOTE: When the unit has been
turned off, it is normal to hear air
being released from the unit. Remove
the universal valve adapter to prevent
pressure loss from the item being
inflated.
How to Use Your Unit
How to Stop:
1.
Set the On/Off switch to "OFF".
On/Off
Switch
NOTE: When the unit has been
turned off, it is normal to hear air
being released from the unit. Remove
the universal valve adapter to prevent
pressure loss from the item being
inflated.
Before
Starting:
1.
Place On/Off switch to "OFF".
2.
Attach inflation needle, extension
nozzle, or high flow
inflator/deflator
adapter body to
universal valve adapter.
3.
Insert inflation needle, extension
nozzle, or high flow
inflator/deflator
adapter body
with desired nozzle into
inflatable.
Risk of Bursting.
Too much air
pressure causes a hazardous risk
of bursting.
Check the
manufacturer's
maximum pressure
rating for objects being inflated.
Carefully follow the "How to Start"
instructions.
3.
Place On/Off switch in the "ON"
position. When sport ball is firm
place On/Off switch in the "OFF"
position. IMPORTANT:
Most
sports balls with no initial air
will fill in less than 10 seconds.
13_ENG
D30502

Publicidad

loading