Action
Clean the motor and check if all
screws and nuts are well tightened
Check the safety and non-return
valves
Check the condition of pipes, hoses,
couplings, connection accessories
and possible air leaks
Check the condition of the air
receiver tank
Drain out the air tank
Check the air filter
Clean the air filter
Replace the filtering element
Check
Check and replacement of safety
and non-return valves
(1) Perform frequent maintenance works when the equipment is used in dusty areas.
(2) These items should be serviced by the distributor's service center unless you have the appropriate tools and mechanical
knowledge.
1st month
or 20
months or
hours
Every 3
Every 6 months or
500 hours
after 100
hours
(1)
Every year or
after 1000
hours
(2)