Publicidad
Idiomas disponibles
Idiomas disponibles
Optima Prone / English
3.3. Front Panel
This model includes a supine position and a prone position. The front panel of the prone position is
shown as follows:
(1). Power Key
Power Key is to turn on and turn off pump.
(2). Panel Lock key
User interface will be locked automatically 5 minutes after last operation. To unlock interface,
press and hold Panel Lock key for 1 second.
NOTE: Always unlock user interface before turning off the pump.
(3). Max Firm key
This key is to make sure mattress can be reached maximal operating pressure. This mode will
last for 20 minutes and then return to previous setting automatically. This function can be used
during patient transfers or nursing procedures for better support. To disable this function,
please press Max firm key again.
(4). LCD & Knob
Knob is to choose and confirm setting displayed on LCD, rotate
the knob and press once to select the setting mode desired in the
highlight.
(5). Alarms and alarm mute key
When there is an alert situation happened, the LCD screen will display a corresponding error
code with an audible buzzer in an interval of a few seconds. The buzzer can be temporarily
suspended by pressing the Alarm Mute key. Alarm buzzer will signal repeatedly every 3 minute
until the alert situation is resolved.
Below presents 2 types of alarm and please refer to the attached error code table for details.
8
Publicidad
