4. GENERAL MAINTENANCE INSTRUCTIONS
A smooth-running air circulation system is critical to keep your toilet functioning properly. Particles generated
during the incineration process can clog the catalytic converter and flue pipe over time, and it is important to
regularly maintain these parts to ensure proper functionality.
In order to ensure optimal operation and extend the lifetime of your Cinderella Jubilee appliance you will need
to set aside a little time for preventive maintenance. Good maintenance routines will give you lower operating
costs and cause less wear on the product. We strongly advise our customers to perform frequent maintenance
as follows:
1. Empty the toilet frequently. Do not base your use on the maximum limit of the appliance.
2. Always clean the ash container and insert when emptied (see section 4.2.1).
3. Always perform the steam cleaning after each box of bowl liners (500 uses), preferably after each emptying
and washing of the ash container (see section 4.2.2).
4. Always observe the end result characteristics when emptying the toilet. Deviations in the end result may
indicate the need for maintenance or service (see section 4.1).
WARNING!
Before performing maintenance, always make sure that the toilet is not in incineration
mode and that the toilet is sufficiently cooled.
4.1 END PRODUCT CHARACTERISTICS
The residual waste, or "ashes", will consist of pathological residue, salts and minerals, and will therefore
often be perceived as hard and crystallized. There should be no visible signs of paper or flaky layers of
unburned waste, the ashes should be a combination of white and dark shade of grey. If there are larger
deposits of black unburned waste, humidity or paper when emptying the toilet, please start an additional
incineration without inserting paper or water. When the incineration is completed, empty the ash container
and perform the maintenance procedures as instructed in this manual.
20