RS Pro RS-8852 Manual De Instrucciones página 6

Sound level meter with datalogger / English
10. Installing the software
1. Start windows
2. Insert the CD into the CD-drive.
3. Run SETUP.EXE installation program in file DISK1, install it to the referred directory
4. Install CP210X drive software：
Connecting the meter with the computer by USB interface, install CP2102 drive software in my computer
property:\hardware\facility management\ COM CP210X USB.
USB Drive Installation
• Copy the CP210XWIN Drivers to a certain directory, such as: C:\ usb_driver.
• Connect the USB to the computer, the Windows system will show finding a new hardware. Choose
specific directory C:\ usb_driver according to the instruction.
After Driver installation, a new COM port will be added to the Ports in the Device Manager. Port number
•
will be ranged following the primary COM ports, such as: COM3 or COM4.
5. Once the drive software is installed, start the application software, connect the meter to the computer
by USB, then search for the COMX port occupied by CP210X, press
appear on the display, which indicate the meter is transmitting data to the computer.
6. Enter the menu REAL TIME \'SETUP'to set the monitoring data (data volume, response, monitoring time)
8
7. DATALOGGER menu:
The computer read the memory data in the meter when REC not appear on the display and the onnection is
in order.
button, the ' ' symbol will not
Sound level meter with datalogger / English
9