RS Pro RS-979E Manual De Instrucciones página 15

Thermal Imager / English
View image info
Press "left" or "right" button, highlight "Info", then press "Menu/ok" button to view the current file info.
Delete a file
Press "left" or "right" button, highlight "Delete", then press "Meno/ok" button to delete the current file.
6-12. USB Mode
connect USB cable to device, popup the menu as follow:
there are two modes for USB, Storage and PC Camera. press up or down button to switch mode.
1. Storage
Browse files stored on the SD card on your computer. if select Storage mode, will display a picture as follow:
2. PC Camera
The device is a USB camera for your computer. If select this mode, will display a picture as follow:
28
7. Fault diagnosis and exclusion
• If you encounter any problems while using the thermal imager, overhaul according to the following table.
• If the problem persists, disconnect the power and contact with the company's technical support department.
Phenomenon of the fault Cause of the fault
Thermal imager cannot start No battery
No power
Thermal imager shut down No power
No Thermal image The lens cap cover
8. Android/iOS APP Thermview
8-1. Software install and uninstall
8-1-1. System required
Android mobile phone：Android 4.0 above, with USB OTG Support
iOS: iPhone4 above
8-1-2. Thermoview App install
Android：Search "Thermview" on Google Play and install it.
iOS: Search "Thermview" on Apple Store and install it.
8-2. Thermview function
8-2-1. Import pictures
1. Use the USB OTG cable download the IR pictures from the thermal imager directly.
2. Copy the IR pictures from PC or SD card.
Thermal Imager / English
Solution
Inserting the battery
Replace the battery or charge it
Replace the battery or charge it
Opened the lens cap
29