Descargar Imprimir esta página

Urmet EASY2 1742 Manual Del Usuario página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

BASIC CAPABILITIES
♦ Simple installation (only 5 wires).
♦ No programming in the video house phone. The
distribution boxes are programmed using dip-
switches.
♦ Complete immunity to short-circuits by the speech
line in the apartments; self-test capability with
indication of any short-circuits on the house
phone riser.
♦ User call by means of 4-digit numeric code preset
according to floor and apartment.
♦ 5 leds on the Call Module for readout of system
operating status.
♦ Timed driving of the electric lock (capacitive
discharge followed by latching current).
♦ 8 door-opener codes programmable for each
Call Module.
♦ Possibility of mixed installations with Easy 2 Wire
house phones.
OPTIONAL CAPABILITIES
♦ Possibility of assigning user call codes
independently of the physical position of the floor
and apartment (code remapping).
♦ Possibility of combining an electronic repertory
(Ref. 826/58) with each Call Module.
♦ Possibility of combining a 4-digit numeric display
with each Call Module for display of the codes
called (Ref. 1042/15) and to facilitate system
programming.
♦ Possibility of upgrading the door-opener codes
of each Call Module to 256.
♦ Optional clock with the possibility of linking the
256 door-opener codes with 3 possible weekly
time bands (Ref. 1042/82).
♦ Voice section functioning in the case of mains
failure with back-up power supply (Ref. 1042/21)
and back-up battery.
♦ Postman Module with possibility of door opening
in pre-established time band.
Note: If optional modules are installed (electronic
repertory, display module, back-up battery), the
video power supply Ref. 1742/20 must be flanked
with the Easy
Wire power supply Ref. 1042/20.
2
DS1742-001D
EQUIPMENT
The basic equipment required to set up the
installation is as follows:
Video house phones
Winflat
Bracket with connector for Winflat
Bracket with Easy 2 Wire
single decoder for Winflat
or
Direct screen Scout
Reflex screen Scout
Bracket with connector for Scout
Embedded box for direct screen Scout
TV camera unit
Call module
TV camera unit module
Adapter for TV camera unit
Module frame c/w embedded box:
for 2 modules
for 3 modules
for 4 modules
Various
Video power supply
Distribution box
Accessories
− House phone
− Easy 2 Wire power supply
− Back-up power supply
− Tabletop kit for direct screen Scout
− Tabletop kit for Winflat
− Display module
− Electronic repertory
Ref. 1202/1
Ref. 1202/96
Ref. 1202/97
Ref. 1204/1
Ref. 1204/10
Ref. 1202/96
Ref. 7108/100
Ref. 1042/11
Ref. 825/70
Ref. 1742/13
Ref. 825/22
Ref.825.23
Ref. 825/24
Ref. 1742/20
Ref. 1742/34
Ref. 1142
Ref. 1042/20
Ref. 1042/21
Ref. 1204/92
Ref. 1202/92
Ref. 1042/15
Ref. 826/58
11

Publicidad

loading