Publicidad
Idiomas disponibles
Idiomas disponibles
MAIN ELEMENTS OF THE SYSTEM
CALL MODULE
Ref. 1042/11
LIBERO
CHIAMATA IN CORSO
PARLARE
OCCUPATO
ERRORE
The Ref. 1042/11 Call Module is part of the Kombi
line with a size of two modules. It can be inserted
and assembled in the various module-holder frames
complete with 2-, 3-, 4-module embedded box and
also in the various casings for wall surface mounting.
For Call Module characteristics and functioning,
refer to the instructions handbook of the Module.
DIGITALIZED CALL MODULE
Ref. 1042/30
The Ref. 1042/30 digitalized call module (see
example on page 44) can be used as an alternative
to the Call module.
Refer to the instructions handbook furnished with
the product for characteristics and functioning.
DS1742-001D
1
2
3
4
5
6
7
8
9
0
TV CAMERA UNIT
Ref. 825/70
Each Call Module must be installed beside a Module
with CCD TV camera unit in which the adapter for
Easy
Wire systems Ref. 1742/13 must be inserted;
2
for assembly of this device, follow the instructions
provided with this.
VIDEO POWER SUPPLY
Ref. 1742/20
The video power supply Ref. 1742/20 powers an
Easy 2 Wire system consisting of a Call Module with
TV camera unit and 64 distribution boxes (for a
maximum of 256 appliances).
ELECTRICAL DATA
Input voltage:
Power:
Output: 0 +20
Output: R1 R2
Protection:
Operating temperature: 5˚C - 45˚C
Note*: If the PTC thermal cut-out is tripped due to
overload or short-circuit, switch off the power supply
of the appliance for at least 1 minute for reset.
110/230Vac
±10% 50Hz
38VA
19.3Vdc Nom. 0.2A max.
19.3Vdc Nom. 1A max.int..
with PTC thermal cutout
(note*)
13
Publicidad
