VIDEO HOUSE PHONES
The SCOUT and WINFLAT video house phones
may be used.
SCOUT VIDEO HOUSE PHONE
Ref. 1204/1 and Ref. 1204/10
The SCOUT video house phone uses a 4.5" CRT
arranged with the longest side horizontal and can
be wall or tabletop mounted.
The SCOUT is available in two versions that differ
according to the different arrangement of the CRT
inside. In one version, screening of the image is
direct while in the other screening is of the reflex
type (using a mirror).
The SCOUT may be semi-embedded in the wall,
embedded with dedicated box or completely surface
mounted fastening a single bracket to the wall with
two screws and wall bolts.
The SCOUT is furnished without the bracket which
must be purchased separately indicating the
following:
- Bracket for Easy 2 Wire Video system
For assembly, refer to the handbook furnished with
the bracket.
The SCOUT can be mounted in the tabletop version
using the specific 1204/92 kit that contains the
adapter box, plug and cord.
16
Ref. 1204/96.
WINFLAT VIDEO HOUSE PHONE
Ref. 1202/1
WINFLAT uses a flat 4" monitor which is not
embedded in screen of the reduced protrusion from
the wall. Installation is extremely fast and simple in
that the wires of the system are connected to the
terminal strips on the bracket to which the WINFLAT
is attached.
WINFLAT Ref. 1202/1 is furnished without the
bracket which must be purchased separately
specifying:
- Bracket for Easy 2 Wire Video system
The WINFLAT can be installed in the tabletop
version using the specific Ref. 1202/92 kit containing
the table support, plug and cord.
For installation, refer to the handbook furnished
with the bracket.
Important: the call volume can not be adjusted.
Ref. 1202/96.
DS1742-001D