Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Do not use the tool for purposes other than those intended by CEMBRE.
The operator should concentrate on the work being performed and be careful to maintain
a balanced working position.
Before starting work on electrical equipment, please ensure that there are no live parts in
the immediate working area and that precautions have been taken for working near live
parts in accordance with EN50110-1.
Do not use this tool on or near live conductors without proper personal protective equip-
ment. Failure to observe this warning could result in severe injury or death.
The tool is unsuitable for continuous use and should be allowed to cool down following
uninterrupted, successive crimping operations. For example, having exhausted a fully
charged battery in one session, delay battery replacement for a few minutes.
Protect the tool from rain and moisture.
Water will damage the tool and battery.
2. DESCRIPTION
The part reference includes the following:
X Hydraulic crimping tool.
X Battery charger (model depends on the tool version).
X Li-Ion rechargeable battery (2 pcs).
X Shoulder strap.
X USB cable 2.0 (Ref. to section 6).
X Plastic carrying case.
The tool can be easily carried using either the main handle (8) or the shoulder strap attached to the
two eyelets of the wrist strap (10) (Ref. to Fig. 7).
During use, the tool can be held comfortably with one hand while positioning the connector with
the other.
Before starting any work, check the battery charge (Ref. to section 2.7) and recharge if
necessary, following the instructions in the battery charger user manual.
8
Publicidad
