NEXPEAK NC202 Guia Del Usuario página 3

Important Safety Warnings
*Before charging, read the instructions.
1. For charging 12 Volt and 24 Volt lead acid and LiFePO4 batteries ONLY.
2. The battery charger must be plugged into an earthed socket-outlet.
3. Contact us for replacement if you found the charger is abnormal or the plug and power
clips are damaged or the screen is unreadable.
4. CAN NOT charge totally dead batteries (0V or bad cells contained).
Do not charge a battery if you are unsure of the battery specific chemistry or voltage.
Test the battery and understand the battery health status before charging.
5. Charging the batteries with vehicles connected is not suggested, it may have potential
damage to the car electronics during the desulphation stage.
6. This battery charger is made by waterproof materials but can not sustain in water or rainy
environments.
7. Do not attempt to charge non-rechargeable batteries and never charge a frozen battery.
8. Stop charging if the battery is damaged or liquid overflow around your battery.
Stop charging immediately if you found the battery is overheated.
Technical Specifications
Input Voltage AC
Power
Charging Current
Working Temperature
Compatible Batteries
Battery Chemistries
Cooling
Material
Type
Display
Model
Dimensions (L x W x H)
Cord length
Weight
120-240 V, AC, 50-60Hz
Max 150W
10A (12V), 5A (24V)
-68°F to +131°F (-55°C to +55°C)
12V & 24V Lead-acid & LiFePO4
Wet, Gel, MF, CA, EFB, AGM
Internal Fan
5A Fireproof
Protable
Highlight LED
NC202
7.6x6.5x4.0 Inches (19.3x16.51x10.16 cm)
9.8ft (3m)
1.65 lb (748.43g)
EN - 2