Held eVest Clip-in Manual De Utilización página 41

User Manual | 92070 / 92170
The back protectors
IMP Moto and IMP Moto 1 back protector were designed for motorcyclists specifically.
Intended use
» The IMP Moto and IMP Moto 1 back protector
are designed to be used on motorbikes exclu-
sively. Do not use it for any other application
(skiing, skating, horseback riding, cycling, etc.).
The back protector protects against impacts
into the ground or an obstacle in an accident.
It may reduce injury severity (contusions or
fractures).
Sizing selection
Refer to the table below to choose your size:
Back protector
Size
Waist-shoulder length
Selecting a protector that is too large may lead to a risk of interference with the helmet,
causing dangerous riding conditions.
Fitting instructions
» The IMP Moto and IMP Moto 1 back protector
must be correctly fitted and worn in order
to effectively protect the protection areas.
To obtain optimum protection and comfort,
please select the right size and ensure that
the airbag product is fitted correctly to your
EN
IMP Moto
S M
35 – 40 cm 41 – 46 cm 47 – 52 cm
eVest Clip-in/eVest
» No product or protection system can offer
total protection against injuries or damages
to an individual or an asset in the event of
fall, collision, impact, loss of control, or other.
Likewise, this back protector may not totally
prevent injuries to the spinal column.
» The back protector does not offer protection
against the risks of graze, cut or penetration
by an object. Use of this product must not
encourage exceeding any limits or taking
additional risks.
L / XL / 2XL Size 1
37 – 42 cm 40 – 45 cm 47 – 52 cm
body. Close all closures and tighten all straps to
ensure correct fit and thereby maximal safety
potential.
» The back protector is compatible with pockets
of size 25 × 46 cm for size 1, 26 × 48 cm for size
2 and 28 × 50 cm for size 3.
41
IMP Moto 1
Size 2 Size 3