Held eVest Clip-in Manual De Utilización página 45

User Manual | 92070 / 92170
Clip-in system eVest
Practical use
This information applies only to the airbag vest eVest (product code 92170).
» The eVest from HELD must be worn under a
motorcycle outer garment. Closing the Velcro
fastener on the front zipper makes the eVest
ready for use in seconds.
» The airbag must be worn properly under the
compatible outer garment to achieve optimal
protection (refer to the illustrated guide below).
Put the vest on and zip up
the front zipper.
The outer garment's zipper
must also be completely
closed to ensure optimum
protection.
EN
» This product is CE certified.
» The eVest from HELD is supplied with In&box,
inflator and back protector.
» The eVest airbag vest from HELD can also be
integrated into compatible outer garments
using Clip-in technology. A complete list of all
Held Clip-in motorcycle jackets can be found at:
www.held.de/clip-in.
The front zipper must be
closed completely.
optional with Clip-in
Pass the five blue attach-
ment loops through the
black attachment points
and close the press studs.
eVest Clip-in/eVest
Close the Velcro fastener at
the top as well.
The jacket zipper must be
zipped up to the top to
ensure optimal protection.
45