IKRA ICMS 2011 Instrucciones De Manejo página 34

EN ENGLISH
Replacing the guide bar and saw chain
WARNING
Wear protective gloves.
A dull or improperly sharpened chain can cause
excessive motor speed during cutting which may
result in severe motor damage.
Failure to replace or repair a damaged chain can
cause serious injury.
The saw chain is sharp. Always wear protective
gloves when performing maintenance to the chain.
Maintenance schedule
Daily check
Bar lubrication
Chain tension
Chain sharpness
Protective hood suspension Before each use
DISPOSAL
If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose
of the device together with your domestic refuse, but
dispose of it in an environmentally friendly manner.
Please dispose of the device itself at an according
collecting/recycling point. By doing so, plastic and
metal parts can be separated and recycled. Information
concerning the disposal of materials and devices are
available from your local administration.
Batteries are not to be put into the rubbish. As a
consumer you are legally obliged to return used batteries
and accumulators. At the end of the duration of your
apparatus, the batteries or accumulators have to be
taken from the apparatus, disposing of them separately.
You have the possibility of delivering your old batteries
and accumulators to the local collecting points of your
municipality or to your dealer or to the distribution
centers.
Dispose of the batteries when discharged. We
recommend applying an adhesive tape on the poles
to protect them against short circuit. Never open the
battery.
34
Before each use
Before each use and
frequently
Before each use, visual
check
For loose fasteners
Protective hood suspension Before each use
Guide Bar
Complete saw
Replacement parts (Bar and chain)
Guide bar
Length
Chain Kette Kette
Pitch
Groove width
Driving links
The chain must be used with a guide bar from the same
manufacturer, according to the above combinations
mentioned above. Spare parts available exclusively
through Service.
Before each use
Before each use
After each use
GC04-26-43P
4" / 10cm
G43-SL-26
3/10"
0,043" / 1,1 mm
26