Igloo ICF 18 Instrucciones De Uso página 20

Operation
ICF80DZ:
1. Press the "SET" button (fig. 3 5, page 5):
- once for the large compartment
- twice for the small compartment
✔ The chosen compartment display blinks.
2. Use the "UP +" (fig. 3 7, page 5) and "DOWN –" (fig. 3 6, page 5) but-
tons to select the cooling temperature. Each compartment can be set to
work as a refrigerator or a freezer.
✔ The cooling temperature appears in the chosen compartment display for a
few seconds. The display flashes several times and then the current tem-
perature is displayed again.
6.7 Switching a compartment off or on (ICF80DZ)
If only one compartment is required, the other compartment can be switched
off to save energy.
Switching off a compartment
If the display of the compartment shows a temperature, you can switch off the
compartment as follows:
1. Press the "SET" button (fig. 3 5, page 5):
– Once for the large compartment
– Twice for the small compartment
✔ The display of the respective compartment blinks.
2. Press the "ON/OFF" button (fig. 3 1, page 5).
✔ "OFF" flashes for five seconds on the display of the respective cooling
compartment, then "OFF" is displayed.
Switching on a compartment
If the display of the compartment shows "OFF", you can switch on the compart-
ment as follows:
1. Press the "SET" button (fig. 3 5, page 5):
– Once for the large compartment
– Twice for the small compartment
✔ The display of the respective compartment blinks.
2. Press the "ON/OFF" button (fig. 3 1, page 5).
20
ICF18, ICF32, ICF40, ICF60, ICF80DZ
EN